CAN-AIR/2
₹0.00
Tax included
Wireless CAN-Bridge with USB Interface
Wireless CAN-Bridge
CAN telegram filtering
ISM band (2.4 GHz)
External antenna
USB interface
Data exchange between CAN nets with two different baud rates possible
Easy Software Configuration
Easy to use Windows configuration tool
All settings are stored within the device
Power-over-CAN Version (Option)
Power supply also via CAN DSUB9 connector (PoC)
Wireless CAN Bridge
The CAN-AIR/2 is designed for bridging two different CAN networks via a radio link. It supports data exchange between CAN nets with two different baud rates. This standalone mode can be used for example to get access to CAN modules installed at turning machine parts or replacement of slip rings via a point-to-point connection (see example 1 below).
Wireless PC-Interface
Todays most common PC interface USB is used to configure CAN-AIR/2. But beside this - CAN-AIR/2 enables a PC to transmit and receive CAN data via USB and CANAIR/2 into and from a distant CAN-AIR/2, e.g. service and maintenance (see application example 2 below).
CAN Interface
The CAN interface is designed according to ISO11898 with electrical isolation and bit rates up to 1 Mbit/s.
LED Indicator
Four LEDs indicate the state of the modules interfaces.
Power Supply
5 VDC directly via USB interface or 12/24 VDC via external power supply.
Specific References
On Top
