EtherCAN 2

The EtherCAN/2 is a gateway to transmit data between CAN and Ethernet. The module is designed for hat-rail mounting in a control enclosure as a backward compatible replacement for the EtherCAN gateway (C.2050.02). In Bridge Mode two EtherCAN/2 can be used to connect two CAN nets via TCP/IP. Interfaces One Ethernet interface (10/100 Mbit/s, RJ45) and one CAN high speed (ISO 11898-2) compatible interface (20 kBit/s up to 1 Mbit/s) based on the CAN controller integrated in MCU. Configuration and Maintenance The gateway has a build-in HTTP server which allows Web based configuration and maintenance. Diagnostic events and messages during runtime can be optionally indicated using the syslog protocol or by sending an email. The gateway firmware can also be updated via the Web interface. Software Support Host drivers for Windows and Linux are available which integrate the CAN gateway as a virtual CAN device on the host, programmed via the common NTCAN-API available for all esd CAN adapter. This allows using all applications, CAN protocol stacks (CANopen, J1939, etc.) and tools (CAN SDK, CANreal, etc.) available for the host platform. In addition the gateway supports the UDP based disclosed and documented Ethernet Low Level Socket Interface (ELLSI) protocol for host platforms which are currently not covered with a dedicated driver. Improvements Compared to the EtherCAN gateway the following technical improvements are implemented: Increased I/O performance Improved diagnostics via the Web interface (e.g. CAN bus diagnostics) Improved usage of the NTCAN-API (e.g. hardware timestamps) Simple Network Management Protocol (SNMP) support Create CAN-to-CAN bridge with two gatewaysDrivers and software support for other operating systems are available on request.Check attachment for Software Support