CAN-CBM-REL4
₹0.00
Tax included
CANopen Module with 4 Relay Outputs
Features
2 monostable change over contacts
2 monostable normally open contacts
Max. switching voltage: 220 VDC/250 VAC
Current loading:
2 A at 30 VDC
0.5 A at 125 VAC
0.3 A at 110 VDC
CAN controller 505C
High-speed CAN interface acc. to ISO 11898-2, electrically isolated, 1 Mbit/s
Ambient temperature range 0...50 °C
CANopen profiles acc. to CiA specification CiA 301, CiA 401
Direct fixing at DIN-EN carrier rail
4 Relay Outputs
The CAN-CBM-REL4 is equipped with 2 changeover contacts (PDT) and 2 normally open contacts (NOC). The relay outputs can switch starting currents up to 2 A and voltages up to 220 VDC/250 VAC. The maximum switching power is 62.5 VA. The contacts can be switched at a maximum on-period of 20 cycles per minute.
The electrical isolation of the channels allows simultaneous connection of various voltages to the module.
Local Microcontroller
A 505C microcontroller is used to handle the relays and the CAN.
CAN Interface
The ISO 11898-compliant CAN interface allows a maximum data-transfer rate of 1 Mbit/s. The CAN interface is electrically insulated by optocouplers and DC/DC converters. It is connected via screw/plug connectors.
Drivers and software support for other operating systems are available on request.Check attachment for Software Support
On Top
