CPCIserial-CAN 402-2

₹0.00
Tax included
CompactPCI Serial (PCIe) Board with 2 CAN Interfaces CompactPCI Serial Board with Altera FPGA for 2x CAN via DSUB9 Connectors High-speed CAN interfaces acc. to ISO 11898-2, bit rate up to 1 Mbit/s Bus mastering and local data management by FPGA (esdACC) PICMG CPCI-S.0 standard supporting high speed PCI Express interface lines Selectable CAN termination on board and cut-out in the front panel for jumper view Support of MSI (Message Signaled Interrupts) Wide Range of Operating System Support and Advanced CAN Diagnostic Software drivers for Windows and Linux included free of charge Optional CAN layer 2 software drivers for real-time operating systems CANopen, J1939 and ARINC 825 protocol libraries ISO 16845:2004 certified esd Advanced CAN Core (esdACC) technology High resolution hardware timestamps Customization on Request Extended temperature range: -40° C +75° C Error simulation support All signals via Rear I/O (P3)

Rating :  

0 Reviews
Add to Wishlist
CAN Data Management The CPCIserial-CAN/402-2 is a CompactPCI Serial board with two electrically isolated high-speed CAN interfaces, according to ISO 11898-2, which are driven by the ISO 16845:2004 certified esdACC (esd advanced CAN Core), implemented in the Altera FPGA. The FPGA supports bus mastering (firstparty DMA) to transfer data to the host memory. This results in a reduction of overall latency on servicing I/O transactions in particular at higher data rates and a reduced host CPU load. Due to the usage of MSI (Message Signaled Interrupts) the CPCIserial-CAN/402-2 can be operated for example in Hypervisor environments. The CPCIserial-CAN/402-2 provides high resolution 64-bit hardware timestamps for CAN messages. Software Support Windows and Linux (NTCAN-API) The CAN layer 2 drivers for Windows and Linux are included in the scope of delivery. Realtime OS (NTCAN-API) CAN layer 2 drivers for QNX, RTX(64), VxWorks and On Time RTOS-32 can be ordered separately. Higher Layer Protocols Higher Layer Protocols are available for many operating systems (see order info): CANopen Master- and Slave-Stack J1939 ARINC825 Additional free-of-charge esd CAN tools for Windows are downloadable from our website. The tools offer efficient setup and analysis of CAN applications and networks. Customization on Request Customized options are available for customized series production in reasonable quantities. Please contact our sales team for detailed information. CPCIserial-CAN/402-2 Successors with CAN FD The CPCIserial-CAN/402-2 is not recommended for new designs. (It can still be used in existing systems, e.g. if the drivers shall not be reinstalled.) Please use the successor CPCIserial-CAN/402-2-FD for new projects. If you need 4 CAN nets, use the CPCIserial-CAN/402-4-FD. Both CAN FD boards can also be used in Classical CAN applications, because they are fully backwards compatible. Drivers and software support for other operating systems are available on request.Check attachment for Software Support

Specific References

On Top
Menu
Close
Cart
Close
Back
Account
Close