CAN-DP/2
₹0.00
Tax included
CAN to PROFIBUS-DP® Slave Gateway
Fast and reliable linking PROFIBUS-DP and CAN
CAN-PLC link, e.g. to SIEMENS SIMATIC S7-300 or S7-400
DP-slave with a total maximum of 300 bytes process data (input and output)
Coupling Modules with CAN Layer 2 Implementation to PROFIBUS-DP
No limitation on the number of CAN nodes by the module
11- and 29-bit CAN-ID support
Configuration with Standard Tools
Run-time configuration via PLC
No special tools required
Plug 'n' play replacement
esd is a member of the PNO (PROFIBUS Nutzerorganisation e.V.)
Linking PROFIBUS-DP and CAN
The module CAN-DP/2 can link any PROFIBUS-DP master to a CAN network. The gateway operates as a PROFIBUS-DP slave-I/O component with a total of maximum 300 bytes process data (up to 244 bytes input and 56 bytes output or up to 244 bytes output and 56 bytes input data) on the PROFIBUS-DP.
Applications
With the CAN-DP/2 gateway you can couple CAN modules with CANopen or layer-2 implementation to e.g. a SIMATIC-S7.
Physical Interfaces
The ISO 11898-compatible CAN interface allows a maximum data-transfer rate of 1 Mbit/s. The PROFIBUS-DP-Slave interface automatically recognizes all usual bit rates up to 12 Mbit/s. The DP as well as the CAN interface are electrically isolated.
Configuration and CAN Protocols
The module can be configured via PROFIBUS configuration tool, e.g. the PLC SIMATIC Manager.
Specific References
On Top
