Bosch 1 1/8'' Breaker Hammer w/ Vibration Control
₹0.00
Tax included
HDC400 Bosch 1-1-8 Hex Dust Collection Attachment Part Number: HDC400 Technical Specifications
Length: 38.0
Material: Plastic rubber
Overall Length: 38.0
Weight: 2.8lb
Works With: Compatible Hammers
11335K BH2760VC BH2770VCD DH1020VC (When used with DH1020VC only for use when tool is pointing downward)
Anti-Static Vacuum Hoses
VH1635A (by means of anti-static adapter included with that hose) VAC008 and most other 35 mm anti-static hoses
Other Vacuum Hoses
VH1035 and VH1635 (by means of VX120 adapter included with those hoses) VAC005 and VAC006 hoses and most other 35 mm hoses
Adapter for 1-1-4 and 1-1-2 Hoses
VAC002 or VAC024
Adapter for 2-1-2 Hoses
VAC020
Includes: Dust collection attachment
The Bosch HDC400 dust collection attachment provides a unique dust collection system for breaker hammers. The ski-boot clamping band makes installation on the tool a snap. The clamp housing allows the attachment to be installed on the tool so that the dust collection shroud can be positioned near the chisel tip for optimum dust extraction. The clamp housing also can be adjusted up or down on the tool to accommodate a small variety of chisel lengths. The system also allows the dust collection shroud to float up or down should it make contact with the work piece during use. The dust port fits Bosch 1-3 -8 In. vacuum nozzles but can also fit 1-1 -4 In. to 2 In. nozzles with the appropriate adapter.
HDC400 Bosch 1-1 -8 Hex Dust Collection Attachment Features
Unique clamping band with ski-boot type clamp provides easy installation on the hammer
Flexible clamping band allows the hose to be adjusted up or down in the band to accommodate different chisel lengths
Dust port fits Bosch 1-3 -8 In. vacuum nozzles and can also be converted to 1-1 -4 In. or 2 In. nozzles using the appropriate adapter (adapters sold separately)
Floating rubber shroud allows the shroud to flex up or down should the shroud contact the workpiece during use
On Top
